Product Description
User Parameters:
dimension: 33 (D)*6.2 (H1) *13.7(H2) mm
Input: DC5~24V. (Input = Output)
Maxium Power Load: 12V-5A, 24V-4A
Sensor Distance: typically 4m
Functions:
The sensor is with aluminum body and anodized surface. with big lens to make detection more sensitive. the cable is out from back of sensor. so it’s necessary to drill a hole (8~10mm) on installation board. the typical detection distance is 4m within 100 degree. actual distance and angle could be very different based in surrounding environment.
The sensor functions as below:
1. ON/OFF function: when detecting human approaching, the LED auto turn ON, and after a delay time, the LED will auto turn OFF. if human approaching again, the delay timer restart, and LED keep ON till the new timer run off.
2. Timer setting: short press the function button, the load LED will flash, the flash times stand for a setting of delay time.
3. Brightness setting: hold the function button for 1s, the load LED will change brightness from bottom to top alternatively. release the button when at any target brightness, then the new brightness will be saved.
4. Daylight sensor: short press the button when power on to active or disable the daylight sensor. Function button is at edge of aluminum cover, get access by pin tool.
