Model: DS08
Load power: 12V-6A, 24V-4A
Input: DC5~24V. (Input = Output)
Size:26 (W)*42 (L) * 7.5(H) mm
Sensor Distance: Typically 50mm
Function:
This sensor is usually installed inside the wardrobe, with the lens facing towards the door. Follow the instruction to connect the sensor with LED and power supply. Install the sensor into position and then power ON. the LED will automatically ON, when the door is opened. automatically turns off when the door is closed .
There’s a function setting hole in front of sensor, by use the Pin to do the setting:
1. Short press, switch the function between DOOR SENSOR MODE and WAVING SENSOR MODE.
2. Long press for more than 2s, enable or disable(default) the function of AUTO OFF. Which means, in DOOR SENSOR MODE, the LED will light ON for 10 minutes if AUTO OFF been
activated.
