Model: DIR08
Load power: 12V-5A, 24V-4A
Input: DC5~24V. (Input = Output)
Size:17.6 (D1)*22.3 (D2) *38(H) mm
Sensor Distance: Typically 3m
Function:
Drill a hole of 17.8~18.2mm on the wall or furniture, push into the sensor while let the lens exposed out to be able to detect human approaching. the typical detection distance is 3m within 100 degree. Actual distance and angle could be very different based in surrounding environment.
The sensor functions as below:
1. ON/OFF function: when detecting human approaching, the LED auto turn ON, and after a delay time, the LED will auto turn OFF. If human approaching again, the delay timer restart, and LED keep ON till the new timer run off.
2. Timer setting: Short press the function button, the load LED will flash, the flash times stand for a setting of delay time.
3. Brightness setting: Hold the function button for 1s, the load LED will change brightness from bottom to top alternatively. Release the button when at any target brightness, then the new brightness will be saved.
4. Daylight sensor: Short press the button when power on to active or disable the daylight sensor.
